Sony XM-GTX1852 User Manual

The XM-GTX1852 amplier aord incredible installation exibility and
packs quite a punch. GTX ampliers oer tremendous value including
convenience features such as: modern cosmetics, variable cross-overs,
multiple channel congurations and singe-side electrical connections to
suit almost any application.
Rated Power at 4 Ohm Stereo
185W x 2 RMS (20Hz-20kHz, 1%THD+N, at 4 Ohm, 14.4V)
1
Maximum Power 4 Ohm Stereo
Maximum power output of 380W per channel at 4 Ohm.
Rated Power at 2 Ohm Stereo
200W x 2 RMS (20Hz-20kHz, 1%THD+N, at 2 Ohm, 14.4V)
Maximum Power 2 Ohm Stereo
Maximum power output of 500W per channel at 2 Ohm.
Rated Power at 4 Ohm Mono
400W x 1 RMS (20Hz-20kHz, 1%THD+N, at 4 Ohm mono, 14.4V)
Maximum Power 4 Ohm Mono
This unit can be used as a bridging amplier with a maximum output of 1000W at 4 Ohms.
High Level Input
Direct connection (High Level Input) can be made with the speaker output of your car audio unit
if it is not equipped with RCA line output. Hi-Level Sensing power On feature allows the unit to be
activated without need for remote connection.
Internal Crossover
Built in selectable 18 dB/Oct 80Hz LPF.
Specications
Amplier Section
Max power output
1000W max poer
Power Ad Hoc
185W per channel at 4 Ohms from 20Hz-20kHz with 1% THD
1
Speaker Impedance
2-8 Ohm stereo
4-8 Ohms mono
Audio
Band
Low Pass Filter: 80 HZ, -18dB/oct
Circuit System
"OTL Output Transformerless Circuit
Pulse Power Supply"
Frequency Response
5-50kHz (+0/-3 dB)
Harmonic Distortion
0.05% or less (at 1 kHz, 4 ohm)
Impedance
2-8 Ohms Stereo,
4-8 Ohms Mono
Input Level
0.3 - 6.0V (RCA input)
1.2 - 12.0V (High Level Input)
Noise Level
93 dBA
Power Supply
OTL Output Transformerless Circuit
Pulse Power Supply
Audio Features
Level Control
High Level Input: 1.2 - 12V
XM-GTX1852
2/1 Channel GTX Series Amplier

Sony XM-GTX1852 Specifications

General

Number of Channels	2
Frequency Response	5 Hz - 50 kHz
Signal-to-Noise Ratio	100dB
THD at 4 Ohms	0.05%
Bass Boost	0 - 10 dB at 40 Hz
Bridged RMS Power (4 Ohms)	500W x 1
Input Sensitivity	0.3V - 6.0V

Summary

Amplifier Specifications

Amplifier Section Specs

Details on amplifier power output, ad hoc power, and speaker impedance.

Audio Specifications

Technical audio parameters including band, circuit system, frequency response, distortion, impedance, input, and noise.

Audio Feature Specifications

Information on audio features like level control and high-level input specifications.

Inputs and Outputs

Power Specifications

Speaker Specifications

Weights and Measurements

Supplied Accessories