10
EN
Locating a specific point in a track
— Manual search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired part.
Switching to other discs
During playback, press either side of
(PRESET/DISC).
Scanning the tracks
— Intro scan
The first 10 seconds of all the tracks on the
current disc are played in order. After the first
disc is over, the next disc is played.
Press (1) during playback.
“INTRO” appears on the display.
When you find the desired track, press again .
The unit returns to the normal MD/CD
playback mode.
Playing tracks repeatedly
— Repeat play
To repeat a track
Press (2) repeatedly during MD/CD
playback until “REP 1” is displayed.
To repeat a disc
Press (2) repeatedly during MD/CD
playback until “REP 2” is displayed.
To search forward
To search backword
SEEK
AMS
To advance to the
next disc
To return to the
previous disc
DISC
PRESET
To repeat all the discs in the
current unit
Press (2) repeatedly during MD/CD
playback until “REP 3” is displayed.
Each time you press (2) the display changes as
follows:
Playing tracks in random
order
— Shuffle play
To play the tracks on the current
disc in random order
Press (3) repeatedly during MD/CD
playback until “SHUF 1” is displayed.
To play all the tracks in the current
unit in a random order
Press (3) repeatedly during MD/CD
playback until “SHUF 2” is displayed.
Each time you press (3) the display changes as
follows:
$
SHUF 1 (Disc shuffle)
$
SHUF 2 (Unit shuffle)
$
Cancel (Normal CD playback mode)
If you press (1) during shuffle play, the first 10
seconds of all tracks will be played in random
order.
REP 2
(Disc repeat)
REP 1
(Track repeat)
REP 3 (Unit repeat)
Cancel (Normal CD
playback mode)
To Next Page
Loading...
Need help?
General
