To Next PageTo Next Page
Need help?Do you have a question about the Sony XR-C7220R and is the answer not in the manual?
General| Type | Car Receiver |
|---|---|
| Channels | 4 |
| Bluetooth | No |
| Remote Control | Yes |
| Display | LCD |
| Radio Tuner | AM/FM |
| DIN Size | Single DIN |
Details the voice guide function for safe driving available on the XR-C8220R model.
Details the SOURCE, MODE, and Dial controls for unit operation and sound adjustment.
Explains the functions of key buttons like SEEK/AMS, SHIFT, SOUND, and DSPL.
Describes buttons for RDS, Traffic Announcements, and Traffic Information Replay.
Covers buttons for opening the unit, turning it off, and resetting functions.
Details the functions of each button on the RM-X47 wireless remote control.
Provides important notes regarding the operation of the wireless remote control.
Instructions on how to reset the unit, including notes on data loss.
Step-by-step guide on how to attach the detachable front panel.
Instructions on how to detach the front panel for security, with important notes.
Detailed steps for setting the 24-hour digital clock using the unit's controls.
Explains the caution alarm and the TIR indicator for the XR-C8220R model.
Instructions on inserting a cassette and starting playback.
Provides tips for changing playback direction and identifying tape types.
Details fast-winding, rewinding, and using Automatic Music Sensor (AMS) for track skipping.
Explains how to change the information displayed during tape playback.
Describes modes like Dolby NR, Blank Skip, ATA, and Repeat Play for tape playback.
Steps to enable or disable repeating a track or the entire disc.
Guides on automatically memorizing stations with the strongest signals.
Instructions for manually presetting up to 10 stations for each band.
How to store specific desired stations on number buttons.
Instructions for selecting and listening to memorized radio stations.
Guide on switching to Monaural mode for poor FM stereo reception.
How to toggle between station frequency and clock display.
Introduction to RDS services like auto-retuning, traffic announcements, and station locating.
How the station name appears in the display when an RDS station is received.
Enables automatic retuning to the strongest signal in a network for uninterrupted listening.
How to stay tuned to a regional programme without automatic switching.
Function to select local stations in the UK, even if not stored on buttons.
How to activate TA to automatically tune into traffic announcements, even from other sources.
Setting a preferred volume level for traffic announcements.
How the unit switches to emergency announcements from any source.
Storing stations with their AF and TA data for automatic function activation.
Instructions for setting up and recording traffic announcements using the TIR function.
How to listen to previously recorded traffic announcements.
Steps to disable the Traffic Information Replay function.
Guide on searching for stations based on programme type (e.g., News, Sports).
How to use RDS CT data to automatically set the unit's clock.
Controlling source selection and tuner/cassette band with the commander.
Locating tracks, discs, or tuning stations using the SEEK/AMS control.
Selecting memorized stations or discs with the commander.
Operating volume, attenuation, and power functions with the rotary commander.
Customizing equalizer, bass, treble, balance, and fader settings.
Using the ATT button to temporarily reduce volume, e.g., for phone calls.
Customizing clock, illumination, dimmer, contrast, voice guide, and beep settings.
Setting the low-pass filter (LPF) for optimal subwoofer output.
Controlling an optional equalizer preamplifier for enhanced sound effects.
Adjusting the line output level to prevent distortion or noise.
Instructions for selecting and playing CDs or MDs.
How to view elapsed time, disc name, artist name, and track name.
Enabling automatic scrolling of long disc or track names.
Using AMS, Manual Search, and Direct Disc Selection to find specific tracks or discs.
Setting the unit to repeat a single track or the entire disc.
Playing tracks in random order (Shuf 1, Shuf 2, Shuf ALL).
Steps to create a custom playback sequence of up to 24 tracks.
How to activate and listen to a pre-programmed track sequence.
Inserting additional tracks into an existing programme sequence.
Deleting all programmed tracks from memory.
Removing specific tracks from a programmed sequence.
Customizing disc names for easier identification and playback.
Viewing the custom names assigned to discs.
Removing personalized disc names, reverting to original CD TEXT if available.
Finding discs using their custom assigned names.
Setting specific tracks to play or skip on a CD.
Selecting tracks to play or skip using the Bank function settings.
Important safety and operational advice, including avoiding direct sunlight and checking connections.
Tips for keeping playback heads clean and avoiding contamination from drinks.
Guidelines for handling cassettes to prevent damage to the tape or the unit's heads.
Instructions for replacing a blown fuse, with warnings about amperage ratings.
Steps to clean connectors between the front panel and main unit for proper function.
Procedure for safely removing the car stereo unit from its mounting.
Detailed technical data for the cassette playback section.
Technical data for FM, MW, and LW tuning capabilities.
Specifications for the power amplifier, outputs, and general unit details.
Solutions for missing sound, erased memory, or display errors.
Troubleshooting distorted sound or AMS operation issues.
Resolving problems with preset tuning, automatic tuning, and stereo indications.
Addressing SEEK start delays, no traffic announcements, and PTY display errors.
Explanation of error messages like NO Mag, NO Disc, NG Discs, Error, Blank, Not Ready, High Temp.
