Sony XR-C900 User Manual

LT AEA EES,
Locating a disc by name
— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD” (page 16).
1 Press momentarily.
The names assigned to the disc currently
playing and the next disc to be played
appear in the display. The name assigned to
currently playing disc is flashing.
LST 4>SCHUBERT =
S'‘Bacyoe
2 Press repeatedly until you find the
desired disc.
3 Press CS) (ENTER) to play back the disc.
Notes %
* To go back the normal display, press CDSPL). Once a
disc name has been displayed for five seconds, the display
noes back to its normal playback mode.
© The track names are not displayed during MD playback.
© If there are no discs in the magazine, “NO Dise” appears
in the display.
° Ifa disc has not been assigned a custont file, “********”
appears in the display.
« If the disc information has not been read by the unit, "2"
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
¢ The information appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Selecting the specific
tracks for playback
— Bank
(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1 Start playing the disc and press (SHIFT).
Then press (P.MODE) for two
seconds.
Bank edit mode
cD! Bank edit,
2 2 =Play:
CURLEERENS
Note
If you have not labeled the disc, the bank edit mode does
not appear and the program edit mode appears. To go back
to the normal playback mode, press (3) (P.MODE) for
two seconds.
2 Press either side of to select
the track number you want to skip and
press (5) (ENTER).
cD! Bank .edik,
2 4 :Skip:
7ECETEEERS
OSC TRACK
The indication changes from “Play” to
“Skip.” If you want to return to “Play,”
press G) (ENTER) again.
3 Repeat step 2 to set the “Play” or “Skip”
mode on all the tracks.
4 Press @) (P.MODE) for two seconds.
Notes
© You can set the “Play” and “Skip” mode on up to 24
tracks. 7
* You cannot set the “Skip” mode on all the tracks.
Playing the specific tracks only
You can select:
¢ Bank on to play the tracks with the “Play”
setting.
*¢ Bank inv (inverse) to play the tracks with the
“Skip” setting.
1 During playback, press (SHIFT), then
press (3) (P.MODE) repeatedly until
“Bank” appears.
2 Press @ (—) repeatedly until the
desired setting appears.
i Bank on —» Bank inv —-> Bank eral
CBI = SCHUBERT
an Bank on
Playback starts from the track following the
current one.
To go back to the normal playing mode, select
“Bank off” in step 2 above.
jaBuey> QW/aD |
17

Sony XR-C900 Specifications

General

Brand	Sony
Model	XR-C900
Category	Car Receiver
Language	English