Sony XVS-6000 - Page 449

449
2 When [Edge Crop] or [Letter Box] is selected in
step 1, set the position of the image.
When [Edge Crop] is selected: Press [Edge Crop
Position] and set the following parameter.
When [Letter Box] is selected: Press [Letter Box
Position] and set the following parameter.
To set the down-converter aspect ratio
1 In the <Aspect> group, select one of the following.
Edge Crop: Crop the left and right sides of a 16:9
image to convert it to a 4:3 image.
Letter Box 13:9: Crop the left and right sides of a 16:9
image to make a 13:9 image and add black bars at
the top and bottom of the image to convert it to a
4:3 image.
Letter Box 14:9: Crop the left and right sides of a 16:9
image to make a 14:9 image and add black bars at
the top and bottom of the image to convert it to a
4:3 image.
Letter Box 16:9: Add black bars on the top and
bottom of a 16:9 image to convert it to a 4:3 image.
Squeeze: Compress a 16:9 image horizontally to
convert it to a 4:3 image.
2 When [Edge Crop] is selected in step 1, set the
position of the image.
Press [Edge Crop Position], and set the following
parameter.
To set the I/P converter conversion mode
In the <Conversion> group, select the conversion mode.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive Y: Detects motion in the luminance signal, and
automatically switches mode between conversion
using frame units and field units.
Adaptive Y/C: Detects motion in the luminance and hue
signals, and automatically switches mode between
conversion using frame units and field units.
No. Parameter Adjustment
2 EC Position Image position
No. Parameter Adjustment
2 LB Position Image position
Original image (16:9) Format converted image
(4:3)
Edge Crop
Letter Box 13:9
Letter Box 14:9
Letter Box 16:9
Squeeze
No. Parameter Adjustment
2 EC Position Image position