Section 4
Replacement of Main Parts
CAUTION
Be sure to set the all POWER switches to OFF and unplug the all power cords before starting any of the
replacement work.
If the replacement work is attempted with the power ON, it may result in electric shock or damage of circuits.
4-1. Tightening Torque
When tightening screws used in this unit, be sure to use a torque driver and tighten screws to the specified tightening
torque.
Tightening torque
PSW 3x6 : 0.80 ±0.12 N·m
PSW 3x30 : 0.80 ±0.12 N·m
M3 (Shoulder screw) : 0.80 ±0.12 N·m
Tip
When using the torque driver with the notation of cN·m, interpret it as follows.
Example:0.8 N·m = 80 cN·m
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-1
To Next Page
Loading...
