Sony XVS-9000 - Page 73

Procedure
1. Remove the two screws (or four screws), then remove the NET-28 board or NET-42 board holding the handles.
NET-28 board
PSW
3 x 6
PSW
3 x 6
Spring plate
Spring plate
NET-28 board
Handle
Handle
Handle
Handle
NET-42 board or
NET-42/CNO-45 board
NET-42 board or
NET-42/CNO-45 board
PSW
3 x 6
PSW
3 x 6
Using a slot Using 2 slots
Using a slot Using 2 slots
Note
When installing the NET-28 board or NET-42 board, insert making sure the board's upper and lower spring plates
do not catch on the board.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-15