Deactivating the Stereo Pair function gives no effect on the established BLUETOOTH connection and the speaker remains in
BLUETOOTH mode. To place the speaker into AUDIO IN or USB mode, a respective tap operation on the speaker is required.
To avoid any sudden loud sound output from the speaker, turn down the volume of the speaker and a BLUETOOTH device or
stop the playback on the BLUETOOTH device before establishing a connection with the BLUETOOTH device.
Related Topic
Using the BLUETOOTH standby (auto power on) function
Installing “Sony | Music Center”
Updating the pre-installed software
5-053-791-11(1) Copyright 2024 Sony Corporation
To Next Page
Loading...
