Sony ZV-1M2 User Manual

Note
You cannot execute functions assigned to the control wheel or the
(Product Showcase Set) button while moving the focusing
frame.
Phase detection AF
When there are phase detection AF points within the auto focus area, the product uses the combined autofocus of the
phase detection AF and contrast AF.
Note
When the F-value is greater than F8, you cannot use the Phase Detection AF. Only Contrast AF is available.
When [
File Format] is set to [XAVC S HD] and [Rec Frame Rate] under [ Movie Settings] is set to [120p]/[100p], Phase
Detection AF cannot be used. Only Contrast AF is available.
Related Topic
Selecting the focus method (Focus Mode)
Touch Operation
Shooting Screen
Focusing using touch operations (Touch Focus)
5-049-603-11(1) Copyright 2023 Sony Corporation
104

Sony ZV-1M2 Specifications

General

Effective Pixels	20.1 megapixels
Optical Zoom	2.7x
Image Stabilization	Optical SteadyShot
Audio Recording	Yes
Sensor Type	Exmor RS CMOS sensor
Lens	ZEISS Vario-Sonnar T* lens
Aperture	F1.8-4
ISO Sensitivity	ISO 125-12800
Autofocus System	Fast Hybrid AF
Video Recording	4K UHD
Video Format	XAVC S, AVCHD
Microphone	Built-in 3-capsule microphone
Display	3.0-inch TFT
Screen Type	Vari-angle
Connectivity	Wi-Fi, Bluetooth
Battery Type	NP-BX1
Battery Life	Approx. 260 shots
Weight	Approx. 292g (with battery and memory card)