Sony ZV-1M2 User Manual

Help Guide
Digital Camera
ZV-1M2
Histogram display
A histogram shows the luminance distribution, displaying how many pixels there are by luminance.
To display the histogram on the shooting screen or playback screen, press the DISP (Display Setting) button repeatedly.
How to read the histogram
The histogram indicates darker values toward the left and brighter values toward the right.
The histogram changes depending on the exposure compensation.
A peak at the right or left end of the histogram indicates that the image has an overexposed or underexposed area,
respectively. You cannot correct such defects using a computer after shooting. Perform exposure compensation before
shooting as necessary.
(A): Pixel count
(B): Brightness
Note
The information in the histogram display does not indicate the final photograph. It is information about image displayed on the
screen. The final result depends on the aperture value, etc.
The histogram display is extremely different between shooting and playback in the following cases:
When the flash is used
When shooting a low luminance subject such as a night scene
Related Topic
DISP (Display Setting) button
Exposure Comp. (still image/movie)
5-049-603-11(1) Copyright 2023 Sony Corporation
138

Sony ZV-1M2 Specifications

General

Effective Pixels	20.1 megapixels
Optical Zoom	2.7x
Image Stabilization	Optical SteadyShot
Audio Recording	Yes
Sensor Type	Exmor RS CMOS sensor
Lens	ZEISS Vario-Sonnar T* lens
Aperture	F1.8-4
ISO Sensitivity	ISO 125-12800
Autofocus System	Fast Hybrid AF
Video Recording	4K UHD
Video Format	XAVC S, AVCHD
Microphone	Built-in 3-capsule microphone
Display	3.0-inch TFT
Screen Type	Vari-angle
Connectivity	Wi-Fi, Bluetooth
Battery Type	NP-BX1
Battery Life	Approx. 260 shots
Weight	Approx. 292g (with battery and memory card)