Help Guide
Digital Camera
ZV-1M2
Exposure Comp. (still image/movie)
Normally, exposure is set automatically (auto exposure). Based on the exposure value set by auto exposure, you can
make the entire image brighter or darker if you adjust [
Exposure Comp.] to the plus side or minus side, respectively
(exposure compensation).
Hint
You can adjust the exposure compensation value within the range of -2.0 EV to +2.0 EV for movies.
Note
You cannot perform the exposure compensation in the following shooting modes:
[Intelligent Auto]
[Scene Selection]
When using [Manual Exposure], you can perform the exposure compensation only when [
ISO] is set to [ISO AUTO].
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory
effect.
( Exposure Comp.) on the control wheel → press the left/right side of the control wheel or turn the
control wheel, and select the desired setting.
+ (over) side:
Images become brighter.
- (under) side:
Images become darker.
You can also select MENU →
(Exposure/Color) → [Exposure Comp.] → [ Exposure Comp.].
When [Touch Operation] is set to [On] and [Footer Icon Touch] is set to [On], you can change the exposure
compensation values using touch operations.
You can adjust the exposure compensation value within the range of -3.0 EV to +3.0 EV.
You can confirm the exposure compensation value that you set on the shooting screen.
1
To Next Page
Loading...
