Sorensen DCS80-13E - User Manual

M362500-01 Rev H www.programmablepower.com
DCS-E 1kW Series &
DCS-E 1.2kW Series
DC Power Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Summary

Important Safety Instructions

Safety Symbols

Explains the meaning of various safety symbols used throughout the manual.

SECTION 1 FEATURES AND SPECIFICATIONS

1.3 Power Supply Features

1.4 Specifications

Presents detailed electrical and physical specifications for 1kW and 1.2kW DCS Series models.

SECTION 2 INSTALLATION AND OPERATION

2.2 Initial Inspection

2.3 Installation

Covers essential installation procedures including input voltage selection, ventilation, and rack mounting.

2.4 Controls, Connectors, and Indicators

Details the function and location of all front and rear panel controls, connectors, and indicators.

2.5 Initial Functional Tests

2.7 Single Supply Operation (Local Mode)

2.8 Multiple Supplies

2.9 Over Voltage Protection (OVP)

Explains the OVP function, its settings, and how to program it via front panel or remote sources.

2.11 Remote Programming of Output Voltage and Current Limit

Explains how to remotely program output voltage and current limit using external voltage, current, or resistance sources.

2.12 Remote Monitoring and Status Indicators

SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION

4.3 Troubleshooting

Provides guidelines for diagnosing and resolving operational issues with the DCS Series power supplies.

4.4 Calibration

Sorensen DCS80-13E Specifications

General

Output Current	0-13A
Power Rating	1040 W
Input Frequency	47-63 Hz
Efficiency	85%
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 70 °C
Protections	Over voltage, Over current, Over temperature
Output Voltage	0 to 80 V