Sorensen DCS300-3.5E - User Manual

M362500-01 Rev H www.programmablepower.com
DCS-E 1kW Series &
DCS-E 1.2kW Series
DC Power Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Summary

Important Safety Instructions

WARRANTY TERMS

SECTION 1 FEATURES AND SPECIFICATIONS

1.3 Power Supply Features

1.4 Specifications

Detailed technical specifications for the power supply models.

SECTION 2 INSTALLATION AND OPERATION

2.3 Installation

Instructions and considerations for installing the power supply unit.

2.4 Controls, Connectors, and Indicators

2.5 Initial Functional Tests

Steps for performing basic functional tests before regular operation.

2.6 Standard Operation

2.7 Single Supply Operation (Local Mode)

2.8 Multiple Supplies

2.9 Over Voltage Protection (OVP)

Explanation of the OVP circuit and how to set its trip level.

2.10 Remote ON;OFF

2.11 Remote Programming of Output Voltage and Current Limit

Methods for remotely controlling output voltage and current using external sources.

2.12 Remote Monitoring and Status Indicators

SECTION 3 THEORY OF OPERATION

3.1 Power Circuit (A2 Assembly)

SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION

4.3 Troubleshooting

Procedures and guidance for diagnosing and resolving operational issues.

4.4 Calibration

Information on recalibrating the unit's circuits and parameters.

Sorensen DCS300-3.5E Specifications

General

Output Voltage	0-300 V
Output Current	0-3.5 A
Power Rating	1050 W
Frequency	47-63 Hz
Cooling	Forced air
Load Regulation	≤0.01% + 2mV
Dimensions	19 in x 5.25 in
Voltage Regulation	≤0.01% + 2mV
Efficiency	85%
Operating Temperature	0 to 50 °C
Storage Temperature	-40 to 70 °C