To Next PageTo Next Page
Need help?Do you have a question about the Sorensen DCS600-1.7E and is the answer not in the manual?
Outlines the terms and conditions of the product warranty provided by AMETEK.
Details electrical parameters like output voltage, current, power, and regulation for 1kW models.
Details electrical parameters for the 1.2kW models, including output voltage, current, power, and regulation.
Explains OVP settings via front panel or remote methods, and its operation.
Details how to remotely control the power supply's output using TTL or AC/DC signals.
Explains programming output voltage and current limit using external sources.
Describes how to monitor output voltage/current and status indicators via the J3 connector.
Provides guidance for diagnosing and resolving operational issues and common symptoms.
Outlines the process for recalibrating the unit's output and display parameters.
General| Output Voltage | 0-600 V |
|---|---|
| Output Current | 0-1.7 A |
| Power Rating | 1000 W |
| Frequency | 47-63 Hz |
| Power | 1000 W |
| Efficiency | 85% |
| Cooling | Forced air |
| Ripple and Noise | 10 mVrms |
| Input Voltage (3-phase) | 208 VAC ±10% |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Dimensions (mm) | 132 x 483 x 445 mm |
