Sorensen DCS60-18E - User Manual

M362500-01 Rev H www.programmablepower.com
DCS-E 1kW Series &
DCS-E 1.2kW Series
DC Power Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Summary

Important Safety Instructions

SECTION 1 FEATURES AND SPECIFICATIONS

1.3 Power Supply Features

1.4 Specifications

Details electrical, physical, and mechanical specifications for 1kW and 1.2kW models.

SECTION 2 INSTALLATION AND OPERATION

2.1-2.3 Setup, Inspection, and Installation

2.4 Controls, Connectors, and Indicators

Details front panel, rear panel, and J3 connector functions and their descriptions.

2.5-2.6 Operation and Functional Tests

Guides users through initial functional tests and standard operating procedures.

2.7-2.8 Supply Operation Modes

2.9-2.11 Remote Features

Covers Over Voltage Protection (OVP), remote ON/OFF, and remote programming of voltage and current.

2.12 Remote Monitoring

Describes how to monitor output status and indicators remotely via the J3 connector.

SECTION 3 THEORY OF OPERATION

3.1 Power Circuit (A2 Assembly)

SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION

4.3 Troubleshooting

Provides guidance for diagnosing and resolving operational issues with a troubleshooting guide.

4.4 Calibration

Sorensen DCS60-18E Specifications

General

Model	DCS60-18E
Power Rating	1080 W
Input Voltage	100-240 VAC
Frequency	47-63 Hz
Operating Temperature	0 to 50 °C
Efficiency	85%
Cooling Method	Fan-cooled