Sorensen DCS40-30E - User Manual

M362500-01 Rev H www.programmablepower.com
DCS-E 1kW Series &
DCS-E 1.2kW Series
DC Power Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Summary

Important Safety Instructions

SAFETY SYMBOLS

Warranty and Returns

WARRANTY TERMS

Defines the warranty coverage, conditions, and exclusions for AMETEK products.

PRODUCT RETURN PROCEDURE

Outlines the process for returning a product for repair, including required information.

SECTION 1 FEATURES AND SPECIFICATIONS

1.2 Operating Modes

1.4 Specifications

Details electrical, mechanical, and physical specifications for 1kW and 1.2kW models.

SECTION 2 INSTALLATION AND OPERATION

2.3 Installation

Covers voltage selection, ventilation requirements, and rack mounting procedures.

2.4 Controls, Connectors, and Indicators

Identifies and describes front/rear panel controls, connectors, and status indicators.

2.5 Initial Functional Tests

2.6 Standard Operation

2.7 Single Supply Operation (Local Mode)

2.8 Multiple Supplies

2.9 Over Voltage Protection (OVP)

Details the OVP circuit, settings, activation, and remote programming methods.

2.10 Remote ON;OFF

2.11 Remote Programming of Output Voltage and Current Limit

Covers programming output voltage and current limits using external sources.

2.12 Remote Monitoring and Status Indicators

SECTION 3 THEORY OF OPERATION

3.1 Power Circuit (A2 Assembly)

SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION

4.3 Troubleshooting

Provides guidance on diagnosing and resolving operational issues using a troubleshooting guide.

4.4 Calibration

Sorensen DCS40-30E Specifications

General

Brand	Sorensen
Model	DCS40-30E
Category	Power Supply
Language	English