Sorensen DCS150-8E - User Manual

M362500-01 Rev H www.programmablepower.com
DCS-E 1kW Series &
DCS-E 1.2kW Series
DC Power Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Summary

Important Safety Instructions

Safety Symbols and Warnings

Explains safety symbols and critical warnings for safe operation and servicing.

Warranty and Product Return

Warranty Terms and Conditions

Details warranty coverage, exclusions, and AMETEK's conditions.

Product Return Procedure

Outlines steps for obtaining an RMA and returning defective products.

Features and Specifications

Installation and Operation

Input Voltage Selection

Front Panel Controls and Indicators

J3 Connector Pinout and Functions

Initial Functional Tests

Multiple Supply Configurations

Over Voltage Protection (OVP)

Explains OVP setup, remote programming methods, and sensing options.

Front Panel OVP Operation

Details setting OVP trip level using front panel controls.

Remote OVP Programming (Voltage)

Explains OVP programming using external voltage sources.

Remote OVP Programming (Resistance)

Explains OVP programming using external resistance.

Remote OVP Programming (Current)

Explains OVP programming using external current sources.

Remote OVP Sensing

Describes shifting OVP sense point to the load.

Remote ON;OFF Control

Details remote control of the power supply's ON/OFF state.

Remote Programming of Output Voltage and Current

Explains how to remotely program output voltage and current limits.

Voltage Programming with External Voltage Sources

Voltage;Current Programming with External Resistance

Voltage Programming with External Current Source

Current Programming with External Current Source

Remote Monitoring and Status Indicators

Maintenance, Troubleshooting, and Calibration

Service and Troubleshooting Guide

Provides guidance on periodic service, preliminary checks, and troubleshooting.

Calibration Procedures

Sorensen DCS150-8E Specifications

General

Output Voltage	0-150V
Output Current	0-8A
Power Rating	1200 W
Ripple and Noise	1 mV RMS
Efficiency	85%
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 70 °C
Input Voltage	100 to 240 VAC
Frequency	47 to 63 Hz
Cooling	Fan