To Next PageTo Next Page
Need help?Do you have a question about the Sorensen DCS8-125E and is the answer not in the manual?
General| Brand | Sorensen |
|---|---|
| Model | DCS8-125E |
| Category | Power Supply |
| Language | English |
Presents detailed electrical and physical specifications for the DCS Series power supplies.
Detailed electrical performance parameters for the 1kW DCS Series power supply models.
Detailed electrical performance parameters for the 1.2kW DCS Series power supply models.
Details the function of each pin on the J3 connector for programming and monitoring.
Provides step-by-step procedures to verify the power supply's functionality before normal operation.
Explains essential precautions and techniques for reliable performance during standard operation.
Describes the OVP circuit, its function, and how to set the trip level.
Provides the procedure for setting the OVP trip level using the front panel potentiometer.
Details how to remotely program OVP using external voltage sources (0-5V or 0-10V).
Explains how to remotely program OVP using a 5k ohm external potentiometer.
Details how to remotely program OVP using a 0-1mA external current source.
Covers remote programming of output voltage and current limit using external sources.
Details programming output voltage using 0-5V or 0-10V external voltage sources.
Explains programming output voltage and current limit using a 5k ohm external potentiometer.
Details programming output voltage and current limit using a 0-1mA external current source.
Guides users on how to identify and resolve operational issues with the power supply.
Lists initial checks to perform before proceeding with internal troubleshooting.
Provides a guide for diagnosing common symptoms encountered during operation.
