Sorensen DCS60-20E - User Manual

M362500-01 Rev H www.programmablepower.com
DCS-E 1kW Series &
DCS-E 1.2kW Series
DC Power Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Summary

SECTION 1 FEATURES AND SPECIFICATIONS

1.4 Specifications

Details electrical and mechanical specifications for 1kW and 1.2kW models.

SECTION 2 INSTALLATION AND OPERATION

2.3 Installation

2.4 Controls, Connectors, and Indicators

2.5 Initial Functional Tests

Step-by-step guide to perform initial functional tests of the power supply.

2.6 Standard Operation

2.7 Single Supply Operation (Local Mode)

2.8 Multiple Supplies

Explains how to operate multiple units in series or parallel for increased output.

2.9 Over Voltage Protection (OVP)

Explains OVP circuit function and how to set trip levels.

2.10 Remote ON;OFF

Details remote ON/OFF control using TTL or AC/DC inputs.

2.11 Remote Programming of Output Voltage and Current Limit

Covers remote programming via external sources and resistances.

2.12 Remote Monitoring and Status Indicators

SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION

4.3 Troubleshooting

Guides users on troubleshooting common issues and when to contact customer service.

Sorensen DCS60-20E Specifications

General

Output Current	0-20 A
Power Rating	1200 W
Form Factor	Benchtop
Cooling	Forced Air
Input Voltage	100-240 VAC, 50/60 Hz
Output Voltage	0-60V
Type	DC Power Supply
Ripple and Noise	1 mVrms
Efficiency	85%
Voltage Regulation	0.01% + 2 mV
Operating Temperature	0°C to +50°C
Storage Temperature	-20 to 70 °C