To Next Page
K
Kelly BeasleySep 12, 2025
What does Err2 mean on my Sotera 825 Measuring Instruments?
- SShannon TaylorSep 12, 2025
If your Sotera Measuring Instruments meter displays 'Err2', it means there is a bad eeprom. Replace the electronics.
What does Err2 mean on my Sotera 825 Measuring Instruments?
If your Sotera Measuring Instruments meter displays 'Err2', it means there is a bad eeprom. Replace the electronics.
How to reset flashing decimal on Sotera 825?
To reset the display to zero when you see a flashing decimal on your Sotera Measuring Instruments, press button 2.
Procedure to change the position of the meter readout.
Steps for cleaning a meter plugged with chemical or debris.
Instructions for storing the meter in a cool, dry place.
Procedure to change the meter's unit of measure to ounces, pints, quarts, gallons, or liters.
Steps to set the meter to use custom 'special' units for measurement.
Method to reset the meter's accumulated total to zero.
Procedure to check the meter's calibration and pulses per gallon.
Instructions for using FLSH mode for flushing without affecting totals.
Procedure for recalibrating the meter using clean water.
Procedure for calibrating the meter with fluids other than water using CAL factors.
Graphs to help select the correct calibration factor based on fluid viscosity.
Details on CE certification and compliance with European directives and standards.
General| Brand | Sotera |
|---|---|
| Model | 825 |
| Category | Measuring Instruments |
| Language | English |
