To Next PageTo Next Page
Need help?Do you have a question about the Sound Devices 702T and is the answer not in the manual?
Essential steps for initial setup and operation of the 702T recorder.
How to connect the 702T to a computer via FireWire to transfer files.
Explanation of physical controls, buttons, LEDs, and the main display.
Detailed breakdown of information shown on the LCD screen.
Overview of all input/output ports on the left, right, and back panels.
Configuring audio inputs, gain, phantom power, and limiters.
Setting audio quality parameters like sample rate and bit depth.
Configuring time code for accurate synchronization with video.
The process of capturing audio, including record modes and integrity.
Understanding the different file types (WAV, FLAC, MP3) and their properties.
Organizing, naming, copying, and deleting recorded audio files.
Information on using storage media like CF cards and external drives.
Managing battery and external power sources for continuous operation.
Instructions for updating the device's operating software.
Information on product support, repairs, and contact details.
General| Number of Tracks | 2 |
|---|---|
| Maximum Sampling Rate | 192 kHz |
| Maximum Bit Depth | 24-bit |
| Phantom Power | 48V |
| Timecode | Yes |
| Storage Media | CompactFlash |
| Recorder Type | Portable |
| Audio Inputs | 2 x XLR/TRS combo |
| Analog Outputs | 2 XLR |
| Headphone Output | 1 x 1/4" TRS Stereo |
| Digital I/O | 1 x XLR AES/EBU |
| Sample Rates | 44.1, 48, 96, 176.4, 192 kHz |
| Bit Depth | 16, 24-bit |
| File Formats | WAV |
