To power off, return the earbuds to the charging case and close it.
RESET
You might need to reset your earbuds if you experience connectivity or function issues.
Open the charging case and take out the earbuds. Within 60 seconds, press and hold the touch areas of both earbuds simultaneously for 10 seconds to reset.
Firmware Update
You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are out of the charging case until
the firmware update is complete. During the update, avoid any usage.
SPECS
Specifications are subject to change without notice.
Input 5V 0.5A
Output 5V 0.2A
Battery capacity 43mAh*2 (earbuds) +700mAh (charging case)
Playtime 6 hours / 36 hours
Charging time
Full charging time (charging case) for earbuds: 1 hour
Full charging time (type-C cable) for charging case: 3 hours
Driver unit 13mm driver
Frequency response 20-20KHz
Impedance 16Ω
Waterproof rating (earbuds) IPX5
Bluetooth version 5.3
Bluetooth range 10m
Regulations and Compliance Information
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security
Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website:
https://uk.soundcore.com/pages/psti-related.
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
To Next Page
Loading...
