EasyManua.ls Logo

Soundcore Liberty Air 2 Pro User Manual

Soundcore Liberty Air 2 Pro
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Liberty Air 2 Pro
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Soundcore Liberty Air 2 Pro and is the answer not in the manual?

Soundcore Liberty Air 2 Pro Specifications

General IconGeneral
Driver Size11 mm
Active Noise CancellationYes
Battery LifeUp to 7 hours (earbuds) / 26 hours (with case)
Bluetooth Version5.0
Water ResistanceIPX4
Charging PortUSB-C
Wireless ChargingYes
Frequency Response20 Hz - 20 kHz
Transparency ModeYes
Microphones6
CodecsSBC, AAC
TypeIn-ear
Charging Time2 hours

Summary

Charging

1. Place the earbuds in the charging case and close it.

Place earbuds in the charging case, close it, and observe LED indicators for charging confirmation.

2. Connect the charging case to the power supply by using a USB-C charging cable.

Connect the charging case via USB-C or wireless charger to indicate charging status.

3. To check the battery level of the charging case, open it to activate the LED indicator.

Open the charging case to activate LED indicator for battery level check.

Soundcore App

HearID

HearID maps hearing sensitivity, analyzes results, and creates a personalized sound profile.

EQ settings

Choose from over 20 EQ settings to optimize listening experience for music genres.

Noise cancellation & Transparency modes

Manage noise cancellation and ambient sound modes for tailored audio experience.

Earbuds firmware update

Update firmware when prompted; keep case open and earbuds charging.

Wearing & Fit

1. Choose the Liquid Silicone EarTips that fit your ears best.

Select the Liquid Silicone EarTips that best fit your ears.

Powering On/Off

Automatic Power On/Off

Earbuds power on when case opens and power off when removed or after inactivity.

Bluetooth Pairing

Initial Pairing

Earbuds automatically enter Bluetooth pairing mode when case opens.

Connect to Device

Connect by selecting 'Soundcore Liberty Air 2 Pro' from device's Bluetooth list.

Pairing with another device

Pair earbuds with another device by placing them in the open case and pressing the case button.

Controls

Music Playback & Call Management

Manage music playback and handle calls with tap and hold gestures.

Ambient Sound Mode Switching

Press and hold to switch between Noise Cancellation and Normal modes.

Mono Mode Operation

Mono Mode Controls

Control music playback and calls using taps and holds in mono mode.

Activate Voice Assistant

Press and hold for 2 seconds to activate voice assistants.

Resetting Earbuds

Reset Procedure

Follow steps to reset earbuds by holding the case button for 10 seconds.

Specifications

Power & Charging Specs

Input, output power, battery capacity, and charging time details.

Playback & Talk Time Specs

Playtime (normal, ANC, transparency) and talk time details.

Audio & Connectivity Specs

Driver size, frequency response, impedance, waterproof level, Bluetooth version & range.

Related product manuals