To Next PageTo Next Page
Need help?Do you have a question about the Soundcore Liberty Neo and is the answer not in the manual?
Play or pause audio playback with a single press of the multifunction button.
Skip to the next audio track by pressing and holding the right earbud's multifunction button.
Go to the previous audio track by pressing and holding the left earbud's multifunction button.
Adjust audio volume by using the connected device's controls.
Answer or end an incoming call with a single press of the multifunction button.
Reject an incoming call by pressing and holding the multifunction button.
Manage calls by holding the current call and answering a new one.
Toggle between calls by pressing and holding the multifunction button on the right earbud.
Seamlessly move calls between earbuds and your phone.
Indicates the status when actively on a call.
Signals an incoming call with a flashing white light.
General| Driver Type | Dynamic |
|---|---|
| Driver Size | 6mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 16 Ohms |
| Bluetooth Version | 5.0 |
| Battery Life | Up to 5 hours |
| Charging Case Battery Life | Up to 15 hours |
| Water Resistance | IPX7 |
| Bluetooth Range | 10m / 33ft |
| Weight (per earbud) | 5.6g |
| Charging Time | 1.5 hours |
