Need help?Do you have a question about the Soundcore Liberty 3 Pro and is the answer not in the manual?
General| Driver Size | 10.6 mm |
|---|---|
| Frequency Response | 20 Hz - 40 kHz |
| Bluetooth Version | 5.2 |
| Bluetooth Codec | SBC, AAC, LDAC |
| Active Noise Cancellation | Yes |
| Transparency Mode | Yes |
| Water Resistance | IPX4 |
| Charging | USB-C, Wireless charging |
| Touch Controls | Yes |
| Companion App | Soundcore App |
| HearID | Yes |
| Driver Type | Dynamic |
| Battery Life (ANC on) | 6 hours (earbuds) + 24 hours (charging case) |
| Battery Life (ANC off) | 8 hours (earbuds) + 32 hours (charging case) |
| Charging Time | Approximately 2 hours |
| Microphones | 6 (3 per earbud) |
Steps for connecting via automatic or manual Bluetooth pairing, including LED indicators.
Guide to connecting to two Bluetooth devices simultaneously for enhanced convenience.
Detailed touch commands for playback, calls, and sound modes in stereo configuration.
Touch commands for playback, calls, and voice assistants when using a single earbud.
Options for personalizing controls, EQ, HearID Sound, and HearID ANC via the Soundcore app.
Features for ambient sound awareness, including full transparency and vocal modes.
Instructions for updating earbud firmware through the Soundcore app to improve performance.
To Next Page