Do you have a question about the Soundcore Liberty 4 NC and is the answer not in the manual?
Headset type | Binaural |
---|---|
Product type | Headset |
Product color | Pink |
Wearing style | In-ear |
LED indicators | Yes |
Recommended usage | Calls/Music |
Protection features | Water resistant |
International Protection (IP) code | IPX4 |
Battery type | Built-in battery |
Continuous audio playback time | 10 h |
Continuous audio playback time (with charging case) | 50 h |
USB connector | USB Type-C |
Bluetooth version | 5.3 |
Connectivity technology | True Wireless Stereo (TWS) |
Driver unit | 11 mm |
Ear coupling | Intraaural |
Microphone type | Built-in |
Number of microphones | 6 |
Accessories included in set | 3 sizes silicone eartips |
Get the most out of your earbuds with features like 3D surround sound, gaming mode, and more.
Choose ear tips that fit best and use the soundcore app for ANC performance.
Tear off stickers, place in case, dry, connect USB-C or wireless charger.
Open case, earbuds power on and enter pairing mode. Select from device list.
Two ways to connect: via app or manually by pressing earbud touchpads.
Hold charging case button for 3 secs until LEDs flash white rapidly.
Overview of TWS and Mono controls for play/pause, track, calls, and sound modes.
Select noise cancellation, normal, or transparency mode in the soundcore app.
Use devices with Android 8.0+ for LDAC. It provides higher quality but uses more power.
Playback pauses when an earbud is removed and resumes when worn.
Earbuds power off automatically after 30 minutes if not connected. Duration is adjustable.
Delete pairing history, place earbuds in case, hold button for 10 secs until LEDs flash white rapidly.
Explains LED indicators for battery level during charging.
Explains LED indicators for battery level after charging.
Connect to app, place earbuds in case, keep case open until update is complete.
Details input, power, battery, playtime, driver, frequency, impedance, waterproof, Bluetooth.
Visit soundcore.com/support for FAQs and additional details.
Adaptive ANC optimizes noise cancellation. Transparency mode keeps you aware of surroundings.
Use devices with Android 8.0+ and enable LDAC in the soundcore app for better audio.
Playback pauses when an earbud is removed and resumes when worn. Answer calls automatically.
Earbuds automatically power off after 30 minutes of inactivity. Duration is adjustable in the app.
Place earbuds in case, leave open, press and hold case button for 10 seconds for reset.
Describes the meaning of different LED colors and flashing patterns (red, white, slow, fast).
Details meanings for flashing white rapidly, steady red, and light off states.
Provides phone numbers and email addresses for customer support and technical assistance.
Outlines the limited manufacturer's warranty period for the product.
Details the availability of lifelong technical support for the product.
Details input, power, battery, playtime, driver, frequency, impedance, waterproof, Bluetooth.
States that Bluetooth word mark and logos are registered trademarks.
Details SGS lab findings on noise reduction performance and frequency bands.
Advises against dropping, disassembly, extreme temperatures, and using non-certified cables.
Warns against listening at high volumes to prevent hearing damage and using earphones while driving.
Indicates product compliance with European Community radio interference requirements.
States product compliance with EU Directive 2014/53/EU and UK Radio Equipment Regulations 2017.
Provides symbols and instructions for proper battery disposal and handling precautions.
Details FCC Part 15 rules, conditions for operation, and warnings about modifications.
Explains how to correct interference and lists troubleshooting measures.
Reports SAR value and explains transmitter placement rules.
States compliance with Canada's licence-exempt RSS standards and lists conditions.
Details EUT compliance with SAR limits and installation requirements.
Explains that warranty benefits are in addition to legal consumer rights.