Need help?Do you have a question about the Soundcore Liberty 2 and is the answer not in the manual?
General| Driver Size | 10 mm |
|---|---|
| Driver Type | Dynamic |
| Bluetooth Version | 5.0 |
| Water Resistance | IPX5 |
| Noise Cancellation | No |
| Charging Interface | USB-C |
| Wireless Charging | No |
| Microphone | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Charging Time | 2 hours |
| Wireless Range | 10 meters (33 feet) |
| Codecs | aptX, AAC, SBC |
| Battery Life | 8 hours (earbuds) |
Instructions for turning the earbuds on and off.
Details on LED indicator behavior for the earbuds.
Steps for pairing the earbuds.
Details on LED indicator behavior during Bluetooth pairing.
Controls for playing and pausing audio.
Control to skip to the next audio track.
Control to go to the previous audio track.
Controls for adjusting audio volume.
Controls for answering and ending phone calls.
Control to reject an incoming phone call.
Control to activate voice assistant.
Personalizes sound based on hearing sensitivity.
Customizes control functions within the app.
Provides over 20 EQ settings for music genre optimization.
Allows updating earbuds firmware via the app.
Power input details for the device.
Specifies the rated output power.
Details on the battery capacity of earbuds and case.
Time required to fully charge the device.
Information on playback time with and without charging case.
Specifies the driver size.
Defines the frequency response range.
Indicates the impedance of the earbuds.
Specifies the Bluetooth version used.
Defines the wireless range of the Bluetooth connection.
To Next Page
