* You can customize more controls in the soundcore app.
POWERING OFF
To power off, place the earbuds in the charging case by aligning the charging contactors of both the earbuds and charging case, and then close the lid.
Once the corresponding earbud is back into the case, the first (left earbud) or the third LED indicator (right earbud) will stay on for three seconds and then go
off.
* When taken out, the earbuds will automatically power off after 10 minutes if they are not connected. The duration can be set in the soundcore app.
RESET
Reset if the earbuds have issues pairing with each other or with other devices.
Delete the pairing history from your Bluetooth device first. Place the earbuds in the charging case and leave the case open. Press and hold the button on the
charging case for 10 seconds until the LED indicators rapidly flash white 3 times.
LED LIGHT GUIDE
To Next Page
Loading...
