8
The key features of the MH2 are:
· 24+4, 32+4, 40+4 and 48+4 Ch frames.
· Mic amp with 50dB range plus -20dB level shift and separate 1/4” Line input.
· Sweep high-pass filter and EQ (4 band sweep EQ).
· 10 Auxes, of which 2 can be switched to create 1x stereo send.
· Pre/post fader switching in pairs (except 5-8 as one block of 4).
· 8 full-time group busses with paired routing.
· LCR Panning on inputs-mix.
· 8 VCAs and 6 Mute Groups.
· 4 Stereo Input channels with Mic/line Capability.
· 4 stereo line returns with 3-band fixed EQ, returns can route to output channels and mix busses.
· 11x4 Matrix built-in.
· 10x linear 60mm output faders, plus 8 rotary output faders with SWAP facility to allow linear faders to control either all 10
Auxes or 8 Grps and 2 Auxes.
· Inserts on Groups and Mix outputs (Group insert moves between Grp & Aux).
· 12-segment Input and Output metering on LED bargraphs.
· Central assignment of VCA Groups, with individual LED displays per channel.
To Next Page
Loading...
Need help?
General
