To Next PageTo Next Page
Need help?Do you have a question about the SoundCraft POWERSTATION 350 and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| Channels | 8 |
| Microphone Inputs | 4 |
| Power Output | 350W |
| Power Output (per channel) | 175W |
| Outputs | 2 |
| Phantom Power | Yes |
| Aux Sends | 1 |
| Speaker Outputs | 2 |
| EQ | 3-band |
| Effects | Built-in effects |
Covers essential safety measures like earthing, wiring, and ventilation.
Details mic/line inputs, insert point, and gain control for signal level.
Explains the EQ section and auxiliary send controls for mono channels.
Covers Lex FX routing, pan control, and PFL monitoring for mono channels.
Details the use of the channel fader for balancing signal levels.
Explains stereo input jacks, gain matching, and EQ adjustments.
Covers Lex FX, balance, PFL, and fader for stereo channels.
Details main L/R faders, aux masters, returns, and 2-track input.
Explains input trim and program selection for the built-in effects processor.
Explains the graphic equaliser and its bypass features for tonal adjustment.
Details status LEDs and the integral power amplifier's operation.
Controls the output level to the speakers connected to the power amplifier.
Explains record output and loudspeaker terminal connections and recommendations.
Details the patchbay's routing capabilities and practical usage examples.
Guides on setting initial control positions and input gain for optimal operation.
Covers microphone placement and common troubleshooting scenarios.
Illustrates a typical large live sound reinforcement setup.
Shows a diagram for a typical recording setup using the Powerstation.
Demonstrates a live setup focused on providing maximum foldback monitor mixes.
Details how to integrate the Powerstation with external mixers and PA systems.
Explains how to split Front of House and on-stage monitor signals.
Describes using the Powerstation as a submixer, with amplifier for on-stage monitors.
Provides a detailed block diagram of the Powerstation's signal flow and component interconnections.
Shows example initial settings for all controls on the console for starting out.
Illustrates various audio cables, including balanced, unbalanced, insert, and speaker leads.
Provides physical dimensions and information on rack-mounting the unit.
Lists key technical specifications like THD, noise, gain, and power output.
