4
REPEAT/RANDOM OPERATION
When an audio CD, or a CD in MP3 format is playing:
Press MODE/RPT/RND (10) once
= REPEAT ONE will show on the LCD display.
The current track is repeated continuously.
“REPEAT” will keep blinks in the LCD display.
Press MODE/RPT/RND (10) twice
= REPEAT ALL will show on the LCD display.
The whole CD disc is played continuously.
“REPEAT” will keep show in the LCD display.
Press MODE/RPT/RND (10) three times
= RAND will show on the LCD display.
The songs on CD disc will play randomly.
“RAND” will keep show in the LCD display.
Press MODE/RPT/RND (10) four times
= All functions are cancelled. The normal play mode is resumed.
Only for CDs in MP3 format or files which are playing:
Press MODE/RPT/RND (10) once
= REPEAT ONE will show on the LCD display.
The current track is repeated continuously.
“REPEAT” will keep blinks in the LCD display.
Press MODE/RPT/RND (10) twice
= REPEAT FOLDER will show on the LCD display.
The selected folder of the MP3 CD is repeated continuously.
“REPEAT FOLDER” will keep show in the LCD display.
Press MODE/RPT/RND (10) three times
= REPEAT ALL will show on the LCD display.
The whole CD is played continuously.
“REPEAT” will keep show in the LCD display.
Press MODE/RPT/RND (10) four times
= RAND will show on the LCD display.
The songs on CD disc will play randomly.
“RAND” will keep show in the LCD display.
Press MODE/RPT/RND (10) five times
= All functions are cancelled. The normal play mode is resumed.
PROGRAMMED PLAY
This can be used to program any desired sequence of tracks.
• Press STOP (4) for 2 seconds to stop playback.
• Press MODE/RPT/RND (10). P01 appears on the display and PROG flashes on the display. Use the TUNE- or TUNE+
to select the desired track then press the MODE/RPT/RND (10) again. The display changes to memory slot P02.
• Select the next track with TUNE+/TUNE- buttons and press MODE/RPT/RND button again. Repeat the procedure
until all desired tracks selected.
• Press PLAY/PAUSE button (3). The playback starts. The first selected track number is shown on the display, the
message CD or MP3 and PROG is shown on the display.
• Press STOP (4) button will stop playback but not delete the memory.
• To play the programme back again, press PLAY/PAUSE button.
• In order to delete the memory, press 2x STOP button. The PROG icon will disappear.
To Next Page
Loading...
