ICD2020 / English Instruction Manual
21
AUX IN
Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.
Use a RCA audio cable to connect the DVD player/TV outputs with the AUX (L/R) input socket
from the sound board.
CD MODE
Notice!
Improper operation can result in material damages!
Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into
the CD player. These may not be played and ejected correctly. Insert only one disc at a time
into the CD player.
1. Press button on the unit and press till “CD” displayed, then press “OK” on the knob
or press the “CD” button on remote control to choose CD.
2. Put a disc (with printing side facing up) inside. The display will say “Loading” and the disc
functions will not work while the disc is loading. After Reading the display shows the
following information in CD mode:
CD mode
Time
Elapsed playback time in minutes
Track number
Playback status (playing/pause)
The Playback will begin automatically once the table of contents is read. The display will show
“No Disc” when the unit is set to CD mode and there is no CD inside.
To pause/resume playback of the CD, press the “ ” button
To switch to the next track, press the “ ” button once
To fast forward through a track, press and hold the “ ” button.
To switch to the previous track, press the “ ” button twice
To fast backward through a track, press and hold “ ” button.
To stop CD playback, press the “ ” button on the remote control.
To eject the disc press in stop mode the “ ” button on the unit.
To Next Page
Loading...
