SOUNDMASTER ICD3030 - Aux in; CD Mode

ICD3030 / English Instruction Manual
16
When pairing is successful, the Bluetooth indicator will light up and stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or other Bluetooth devices.
Press “ ” on the radio or Remote Control to start or pause the playback. You can press “ ”
or “ ” on the radio or Remote Control to play the previous or next track.
AUX IN
Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.
Use a RCA audio cable to connect the DVD player/TV outputs with the AUX (L/R) input socket
from the sound board.
CD MODE
Notice!
Improper operation can result in material damages!
Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into
the CD player. These may not be played and ejected correctly. Insert only one disc at a time
into the CD player.
1. Press button on the unit and press “ ” till “CD” displayed, then press “OK” on the
knob or press the “CD” button on remote control to choose CD.
2. Put a disc (with printing side facing up) inside. The display will say “Loading” and the disc
functions will not work while the disc is loading. After Reading the display shows the
following information in CD mode:
 CD mode
 Time
 Elapsed playback time in minutes
 Track number
 Playback status (playing/pause)
The Playback will begin automatically once the table of contents is read. The display will show
“No Disc” when the unit is set to CD mode and there is no CD inside.
 To pause/resume playback of the CD, press the “ ” button
 To switch to the next track, press the “ ” button once
 To fast forward through a track, press and hold the “ ” button.
 To switch to the previous track, press the “ ” button twice
 To fast backward through a track, press and hold “ ” button.
 To stop CD playback, press the “ ” button on the remote control.
 To eject the disc press in stop mode the “ ” button on the unit.