SOUNDMASTER ICD3030 - Technical Specifications

ICD3030 / English Instruction Manual
20
USB driver or MP3
player is not detected.
1. Check if the USB driver or MP3 player is plugged properly.
2. Some USB hard disks need external power supply, make sure it
is connected to the power.
3. Not all MP3 players can be read directly on the device – use an
USB drive instead.
NetRemote does not
show or connect to
ICD3030
1. Reopen the App.
2. If you have several streaming from several devices at the same
time, it may cause crash, reboot ICD3030 and/or your device.
All other undetermined
cases.
ICD3030 may process large amount of data after a period of
operation, no matter in which mode, it will cause the system freeze
or malfunction. Reboot ICD3030 if necessary.
The normal function of the product may be disturbed by strong
Electro-Magnetic
Interference. If so, simply reset the product to resume normal
operation by following the instruction manual. In case the function
could not resume, please use the product in other location.
The device may malfunction when used in areas with strong radio
interference. The device will work properly again once there is no
more interference.
Under the environment with Conducted Immunity disturbance, the
sample may malfunction. It will automatically recover to normal
when the Conducted Immunity disturbance stopped.
TECHNICAL SPECIFICATIONS
Power supply
: Use only the supplied adapter
Power input
: 100-240V~50/60Hz
Power output
: DC 18V 1.2A
DAB+ range
: Band III 174 - 240 MHz
FM range
: 87.5 – 108MHz
Bluetooth
®
Version
: Version 2.1 + EDR
Connectivity
: WiFi Dual modes to support 2.4GHz and 5GHz WiFi system
Audio power output
: 2×15 W
Standby consumption with
setting "Keep network in
standby"
: 1.5W
Technical changes and misprints reserved
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.soundmaster.de
Duplication only with the permission of Woerlein GmbH