SOUNDMASTER MCD1820 - Page 22

MCD1820 / English Instruction Manual
6
normal CD due to difference format.
ID3 (file/title/artist/album) function
Press “DELETE / INFO“ on the remote control until the LCD display show “ file - … ”during
playback of MP3, the file / title / artist / album name is being displayed in sequence . Press
“DELETE / INFO” again to disable the function.
Remark:
- in that case if no name had been assigned for the track, “no title “or “no artist “is being
displayed” on LCD display.
- No title/album name can be recognized if the input format on the disc/mass media is not
supporting by the system.
- The system support only English and numeral for ID3 function.
⚫ Repeat/random mode (by remote handset)
Press the “PLAY MODE“ button during playback to select repeat and random function, a single
track, single folder (MP3 only) or all the tracks can be played in difference mode as follow:
For CD
(1) Repeat 1 (2) Repeat all track (3) Random (4) Off mode
Indicator
Play mode on LCD display
Repeat track
Repeat all ALL
Random
Off mode --------------
For MP3 disc/file
(1) Repeat 1 (2) Repeat 1 Folder (3) Repeat all tracks
(5) Off mode (4) Random
Indicator
Play mode on LCD display
Repeat single track
Repeat single folder
Repeat all tracks ALL
Random mode
Off mode -----------------
CD / MP3 disc programming
Up to 40 tacks can be programmed for disc play in any order. Before use, be sure to press the
“ / ENTER“ button.
1. Set in CD mode & stop the playback.