NR912/ English instruction manual
3
C. VARIOUS PLAYING MODES
1. Normal play mode
In the normal playback condition play will star at track No.1
2. Repeat play mode
This function allows all the tracks on a disc or the same track to be played repeatedly.
A. To repeat the same track:
Press the REPEAT button before play or during play. The REPEAT ONE / ALL LED indicator will
flash.
B. To repeat the entire disc:
Press the REPEAT button two times; REPEAT ONE / ALL LED indicator lights up.
C. To release the repeat play function.
Press the REPEAT button again. (The REPEAT indicator is goes off).
3) Random play mode
In CD playback mode, press RANDOM button once enter into random function. Press RANDOM
again to cancel the random function.
3. Program Mode.
A. Press the PROGRAM button in the stop mode. The program LED will flash.
B. Press the Reverse Skip Button or the SKIP FWD. / SKIP REV. button to select a track number,
the select track number will be shown.
C. Press the PROGRAM button , the first selected track is now programmed. The PROGRAM
LED will flash.
D. Repeat step 2 and 3 to enter other tracks into the program up to a maximum of 20.
E. After entering a program, press the PROGRAM button to check the program content. The
PROGRAM LED will flash and the track numbers in order of the programmed tracks will be
shown. At last, the PROGRAM LED will stop flashing and the total track number on the disc
will be shown. After the program is played, press the PROGRAM button twice in the stop
mode to check the program contents. (Up to 20 tracks can be entered into the program
memory, for play in any order desired. If you try to enter more tracks, the track can not be
selected. )
F. After entering a program, press the PLAY/PAUSE button, Program play starts from the
beginning of the first programmed track. The PROGRAM will light, and the track number which
is currently playing will be shown.
G. Note: A program can not be entered during play. After entering a program, if the STOP button
is pressed twice, all of the programmed tracks will be clear. The program can not be changed.
Clear the program and enter tracks into the program again. The programmed tracks can not
be played at random.
To Next Page