Parameters and specifications
: AC 100-240 V , 50/60 Hz
:Semiconductor laser, wavelength 650 nm
:More than 80 dB (ANALOG OUT connectors only)
:More than 85 dB (DVD/CD)
Note: Design and specifications are subject to change prior notice.
Battery Specifications:
Output:7.4V
Charge / Discharge Time:
Standard charge time:3h ~ 4h
Storage and work circumstances:
Car bracket holder
Install Mounting Kit on the car headrest Introduction.
1. Install Mounting Kit on the car
headrest Introduction
2. Put the bracket to the knighthead of
the car seat and set the 4 screws to
fix the bracket.
3. Turn the screw to fix the portable
DVD player on the salver.
4. .Set the button tongs into the
bracket and cut it fine.
5. Turn the screw to adjust the angle
of view.
1. Press this two buttons to disconnect
the bracket.
2. For the direction as indicated by the
arrow, then draw the tongs.