SOUNDMASTER PL979 - Playback Functions; Playing CD or USB Content; Track Navigation and Search

PL979 / English Instruction Manual
5
Note: CD or USB mode have the same operating procedures.
PLAYING CD OR USB
1. Press the “MODE” button to enter the CD or USB mode.
2. CD: Press the “OPEN/CLOSE ” button to open the CD door. Place a CD with the printed
side facing up inside the tray, then close the CD door by pressing the “OPEN/CLOSE “
button again. After reading the disc the first track will start playback.
USB: Insert carefully USB drive in the USB socket. After reading the USB drive the first
track will start playback.
3. Press the “PLAY/PAUSE ” button to pause the playback. The track time will start blinking.
Press the “PLAY/PAUSE ” button again to resume the playback.
4. Press the “STOP ” button to stop the playback.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD / USB MODE
During CD/USB playback, press the “ ” or “ ” button to skip to next or previous track. 1.
The disc will begin to play from your selected track.
For fast search forward or backward within a track or locate a specific passage of it, press 2.
and hold “ ” or “ ” button. The player will search forward or backward at a high speed.
Release the button when you hear your desired passage and the playback will resume
normal from that point.
Only for CD-MP3 or USB: To select next folder (album) press the “FOLDER” button on 3.
the unit or remote control.
REPEAT AND RANDOM FUNCTION
Press the “PLAY-MODE” button on the unit or the “P.MODE” button on the remote control, 1.
the unit will repeat the current playing track and “Rep1” will show on the screen
Press the “PLAY-MODE” button on the unit or the “P.MODE” button on the remote control 2.
twice, the unit will repeat the tracks in the playing folder and “RepF” will show on the
screen (only for CD-MP3 or USB).
Press the “PLAY-MODE” button on the unit or the “P.MODE” button on the remote control 3.
three times; the unit will repeat all tracks of the USB or CD and “RepA” will show on the
screen.
Press the “PLAY-MODE” button on the unit or the “P. MODE” button on the remote 4.
control four times, the player will enter into the random playing mode and “Rand” will
show on the screen.
Press the “PLAY MODE” button on the unit or the “P.MODE” button on the remote control 5.
again to cancel the RANDOM function and the unit resume to the normal playing
sequence.
NOTE: There is no folder in the disc if no MP3 is detected. During playing a CD-Disc, there
has no ALBUM repeating function.
Wipe in a straight line from the inside to the outside of the
disc. Small dust particles and light stains will have
absolutely no effect on reproduction quality.