TR250 / English Instruction Manual
3
Bluetooth Operation
To switch the unit from USB / FM to BT mode, press the / Mode repeatedly until BT is
displayed.
Connection:
BT flash to indicate the unit is search for the device for pairing.
Check the device list under your BT setting in the smart playing device.
Selected TR250 and connected. (If code is needed, 0000/1234)
Tone announces that the connection is successful.
Press and hold “Memory“ to disconnected the BT device.
Press “Memory” button to fast connect again with the device.
Remark: If BT leave the reception area (10 meter/30 feet), the device will auto connect with the
device if the device come back to the reception area in 10 mins.
Operation:
Press “Memory” to control PLAY/STOP
Press < or > button for previous or next song.
CLOCK FUNCTIONS
Time setting (24 Format)
Set the unit in the standby mode.
Press and hold “Memory“ for 2 seconds.
Press < or > repeatedly when find the display "CL" flicker
Press “Memeory“ again to enter time setting. "0:00 " flicker.
Press < or > to choose the Hour and press „Memory“ to confirm the setting.
Press < or > to choose the min and press „Memory“ to confirm the setting.
Finished time setting and press / Mode to quit the setting.
ALARM SETTING
Set the unit in the standby mode.
Alarm 1 or 2 setting:
Press and hold ”MEMORY“ for 2 seconds.
Press < or > repeatedly when find the display "AL1" or “AL2” flicker
Press ”MEMORY“ to enter "AL1" or “AL2”setting.
Press < or > to switch from "off" ,"on" and "set"
Press ”MEMORY” to enter alarm signal setting when "set" is flicker,
Press < or > to switch from "TU"(FM), "BU"(Buzzer), USB and selected the wake up signal.
Press “MEMORY” to confirm the selection and enter to Alarm time setting.
Press < or > to choose the Hour and press “MEMORY” to confirm the setting.
Press < or > to choose the min and press “MEMORY” to confirm the setting.
To Next Page
Loading...
