English
5
Note:
3. SOUNDPEATS Truengine2 Bluetooth earbuds can remember previously
4. Mono mode: After SOUNDPEATS Truengine2 is paired successfully, both the left
earbud and the right earbud can be usd separately.
paired devices. When you make the second connection, simply activate
the Bluetooth in your device, take out both earbuds from the charging case.
They will connect to each other, and reconnect to your device automatically -
If the earbud doesn’t automatically connect to your device, please activate the
Bluetooth in your device and hit “SOUNDPEATS Truengine2” on the Bluetooth list.
1. When SOUNDPEATS Truengine2 L requires pairing, please choose connection,
or the Mono Mode can’t be used normally.
2. When SOUNDPEATS Truengine2 connects with devices which have more
advanced chips than Qualcomm Snapdragon 855 and Qualcomm, it will
connect two pairing names automatically, no need to proceed second
pairing manually.
3. If you want to change the pairing device in the connected status, please just
long press and hold the touch area for 6s to have it enter pairing mode
directly and pair to a new device.
To Next Page
Loading...
