KEYLITE
KEYLITE KEYLITE
KEYLITE keyboards are suitable to send the complete range of GENERAL MIDI messages.
Above the first 49 keys (25 keys on K25) there are printed labels that allow you to enter the Advance
Function in EDIT mode. Here following the specification for each function.
ASSIGN
ASSIGNASSIGN
ASSIGN
Press EDIT button to enter keyboard Advanced Function mode, the LED of EDIT is on. Press ASSIGN
button to enter controller assignment mode, LCD shows CHO, reminding the user to choose the controller
that needs to be assigned. Move the desired control to select it (For example, if you want to assign
SLIDER, move the SLIDER to select), the LCD shows the controller number of the selected controller, input
the desired assignable parameter value with numeric pad and press ENTER to confirm (for example, if
Slider is selected, input 147 and the Slider is assigned as Master Volume Controller).
* Assignable controllers reference: Appendix 1 - Assignable Controller List
* Assignable controller parameters reference: Appendix 2 - Assignable Controller Parameter List.
PEDAL CURVE
PEDAL CURVEPEDAL CURVE
PEDAL CURVE
You can adjust the pedal resistance curve to better work with pedals of different specifications from
SOUNDSATION pedals.
Estimate resistance curve value
Value of Pedal CURVE = (128 x pedal resistance value) / (10K + pedal resistance value)
EX. if the pedal resistance value is 10K, the value of Pedal CURVE is:
128*10K/ (10K+10K) = 64
For pedal resistance value, please refer to the technical specifications provided by pedal manufacturer.
The resistance curve estimation does not need to be very accurate, or you could simply adjust it without
calculation, as long as the travel and succession of the pedal satisfy your needs.
The initial value of resistance curve is 64, adaptable to most pedals in the market.
When you use switching type pedal, the recommended resistance curve value is 64.
When DATA +/- is assigned as Pedal 1 CURVE or Pedal 2 CURVE, DATA +/- can be used to adjust
resistance curve values. Press two buttons of DATA +/- at the same time to set the resistance curve value
to initial 64.
When the pots （C1~C4 or C5~C8）are assigned as Pedal 1 CURVE or Pedal 2 CURVE, they can be
used to adjust pedal resistance value.
Press EDIT button to enter keyboard multi-function mode, press Pedal 1 CURVE or Pedal 2 CURVE multi-
functional keys to enter pedal resistance curve adjustment mode, input the pedal resistance value with
numeric pad, then press ENTER to confirm.
VELOCITY CURVE
VELOCITY CURVEVELOCITY CURVE
VELOCITY CURVE
Velocity curve can be adjusted to find the best feeling with the keyboard.
Press EDIT button then Press VEL CURVE and press a number from 0 to 4 (5 different curves).Press
ENTER to confirm.
To Next Page
Loading...