TEMPO
TEMPOTEMPO
TEMPO
Which adjust the tempo of MIDI Time Code (MTC
MTCMTC
MTC).
When DATA +/- is assigned as TEMPO, it can be used to adjust tempo. Press DATA +/- at the same time
to set the tempo to initial 100.
When the pots (C1~C4 or C5~C8) are assigned as TEMPO they can be used to adjust tempo.
Press EDIT button to enter keyboard multi-function mode, press TEMPO to enter tempo adjustment mode,
then input the tempo value with numeric pad, and press ENTER to confirm. (K49/61).
PROGRAM
PROGRAMPROGRAM
PROGRAM
Voice adjusting function, adjusting the voice of current channel.
When DATA +/- is assigned as PROGRAM, DATA +/- can be used to adjust program. Press DATA +/- at
the same time to set the program number to initial 0.
When the pots（C1~C4 or C5~C8）are assigned as PROGRAM they can be used to adjust program.
Press EDIT button to enter keyboard multi-function mode, press PROGRAM button to enter program
adjustment mode, then input the program number with numeric pad and press ENTER to confirm.
MIDI CHANNEL
MIDI CHANNELMIDI CHANNEL
MIDI CHANNEL
When DATA +/- is assigned as CHANNEL, use DATA +/- to adjust general MIDI channel. Press DATA +/-
buttons at the same time to set general MIDI channel to initial 0.
When pots C1~C4 or C5~C8 are assigned as CHANNEL they can be used to adjust general MIDI channel.
Press EDIT button to enter keyboard multi-function mode, and then press CHANNEL to enter channel
adjustment mode and then use numeric pad (or C1~C4 or C5~8) to enter general MIDI channel number
and press ENTER to confirm.
TRANSPOSE
TRANSPOSETRANSPOSE
TRANSPOSE
This function allows the keyboard to change the pitch up/down by semi-tone.
When DATA +/- is assigned as TRANSPOSE use DATA +/- to adjust transpose. Adjustment range is +/-
12 semitones. Press DATA +/- buttons at the same time to set transpose to initial 0.
Hold EDIT and use DATA +/- to adjust transpose. Adjustment range is +/- 12 semitones. Hold EDIT and
DATA +/- at the same time to set transpose to initial 0.
When pots C1~C4 or C5~C8 are assigned as TRANSPOSE you can use it to adjust transpose.
Adjustment range is +/- 12 semitones.
OCTAVE
OCTAVEOCTAVE
OCTAVE
This function allows the keyboard to change the pitch up/down by octave.
When DATA +/- is assigned as OCTAVE, use DATA +/- to adjust octave. Adjustment range is +/- 3
octaves. Press DATA +/- buttons at the same time to set octave to initial 0.
When pots C1~C4 or C5~C8 are assigned as OCTAVE they can be used to adjust octave. Adjustment
range is +/- 3 octaves.
To Next Page
Loading...