Need help?Do you have a question about the Soundstream AirBass and is the answer not in the manual?
General| Brand | Soundstream |
|---|---|
| Model | AirBass |
| Category | Amplifier |
| Language | English |
Details the primary design and construction features of the DaVinci amplifier.
Details features like balanced inputs, LSE.Q, and AIRBASS upgradability.
Explains the function and purpose of each control and indicator on the amplifier's front panel.
Details the specific design features of the Soundstream BLT4 Balanced Line Transmitter.
Provides a guide to BLT4 callouts and its technical specifications.
Details the subwoofer channel's low pass crossover function and range.
Explains the high pass crossover for two-way systems on channels 1-4.
Describes the circuit for rear fill de-emphasis on channels 3&4 in 2/3-way modes.
Explains the bandpass configuration for midbass and satellite speakers in 3-way mode.
Details the bandpass configuration for midbass, midrange, and tweeter in 4-way mode.
Guides on selecting remote or local inputs based on system configuration.
Explains Coherent Stereo and Bridged Mono operation for stereo channels.
Details the use of high-quality cables for power and ground connections.
Explains external and internal fuse protection requirements for the amplifier.
Covers connecting the remote turn-on lead and signal cables.
Provides guidance on selecting appropriate speaker cable gauge and type.
Advises on choosing a suitable location and ensuring adequate ventilation for the amplifier.
Instructions on setting input and crossover switches to desired positions.
Step-by-step guide for physically mounting the amplifier.
Details the final wiring connections and the power-up procedure.
Explains the flexibility of the DaVinci crossover for high pass, bandpass, and low pass filters.
Provides initial settings for subwoofer low pass and high pass filters in Z-way mode.
Offers initial settings for midbass, satellite, and subwoofer filters in 3-way mode.
Provides initial settings for tweeter, midrange, midbass, and subwoofer filters in 4-way mode.
Step-by-step guide for setting amplifier input levels for optimal signal-to-noise ratio.
Explains the LSE.Q subwoofer control circuit for subsonic filtering and variable boost.
Details how to apply LSE.Q for woofer excursion control and system optimization.
Describes the wireless remote control level adjustment for the subwoofer channel.
Details the steps for installing the AIRBASS circuit board and switch.
Illustrates a 3-way system with midbass, non-fading subwoofer, multiple subwoofers, and rear speakers.
Illustrates a 4-way system with midbass, midrange, subwoofers, and fader control.
Shows a 3-way system configured for bridged 5-channel operation.
Details a 2-way system with midbass, subwoofers, and front/rear fader control.
Describes the internal circuits protecting the amplifier from overheating and short circuits.
Lists common issues, their potential causes, and verification steps.
Details the amplifier's power output at different impedances and voltages.
Lists crossover frequency ranges and other technical specifications.
To Next Page