Need help?Do you have a question about the Soundstream TARANTULA NANO and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Minimum Impedance Unbridged | 1 Ohm |
| Signal to Noise Ratio | >90dB |
| Input Sensitivity | 200mV - 6V |
| Bass Boost | 0 - 12dB |
| Bass Boost Frequency | 45Hz |
| Subsonic Filter | 10Hz - 50Hz |
| Frequency Response | 10Hz - 220Hz |
| Crossover Type | Low Pass |
Details the 90-day warranty for products not installed by an authorized dealer.
Covers products purchased and installed by an authorized Soundstream dealer for two years.
Lists conditions that void the warranty, including accident, misuse, and improper installation.
Sets the frequency for the LPF, filtering higher frequencies from 50Hz to 5kHz.
Lists RMS output power for various impedances, voltages, and bridged configurations.
Connects the remote level control for subwoofer volume adjustment.
Lists RMS output power for various configurations (channels, impedance, voltage, bridged).
Troubleshooting steps for an amplifier that fails to power on.
Diagnosing issues when the protection LED indicates a fault.
Steps to resolve the issue of no audio output from the amplifier.
Troubleshooting causes for reduced audio output levels.
Identifying and fixing sources of hiss or noise in speaker output.
Diagnosing and correcting distorted audio signals.
Addressing overheating issues and ensuring proper ventilation.
To Next Page