Need help?Do you have a question about the Soundstream SA.120 and is the answer not in the manual?
Details and labels for the SA-120 amplifier's controls and connections.
Details and labels for the SA-244 amplifier's controls and connections.
Details and labels for the SA-245 amplifier's controls and connections.
Covers power/ground wiring, fuses, remote turn-on, signal, and speaker connections.
Guidance on choosing a location and physically mounting the amplifier securely.
Instructions for setting switches and connecting wires for operation.
Steps to follow for powering on the amplifier and verifying operation.
Details and labels for the SA-120 amplifier's controls and connections.
Details and labels for the SA-244 amplifier's controls and connections.
Details and labels for the SA-245 amplifier's controls and connections.
Covers power/ground wiring, fuses, remote turn-on, signal, and speaker connections.
Guidance on choosing a location and physically mounting the amplifier securely.
Instructions for setting switches and connecting wires for operation.
Steps to follow for powering on the amplifier and verifying operation.
General| Channels | 2 |
|---|---|
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| THD @ Rated Power | <0.05% |
| Signal to Noise Ratio | >95dB |
| Crossover Frequency | 50Hz - 250Hz |
| Bass Boost | 0-12dB |
| Fuse Rating | 30A |
| Bass Boost Frequency | 45Hz |
| Frequency Response | 10Hz |
To Next Page