16
SAMPLE SYSTEM #3
2 channels of input with 2 channels of bridged high pass output
External input to channels 3 & 4 with an external crossover
5
• Fault Monitor LED on the top panel notifies you of blown power
supply fuses.
• 1/2 ohm Drive Ability - The REFERENCE404s amplifier is designed
to drive virtually any load—all the way down to 1/2 ohm stereo (per
channel) or 1 ohm mono.
• Four Independent Dual Discrete Class A Drive Stages - Over six
times the drive current of most amps, which maintains performance
into low impedance loads.
• Drive Delay
TM
Muted Turn-on/off Circuit - A unique circuit which
completely eliminates any amplifier-related turn-on/off noises.
• Flexible Input Sensitivity accepts voltages from 200 mV to 5.0 V,
permitting maximum output from the amplifier with virtually any
source unit.
To Next Page
Loading...
