Need help?Do you have a question about the Soundstream Reference Series 200 and is the answer not in the manual?
General| Brand | Soundstream |
|---|---|
| Model | Reference Series 200 |
| Category | Car Amplifier |
| Language | English |
Highlights mil-spec glass epoxy circuit boards and gold-plated brass connections for robust build quality.
Explains the exclusive circuit allowing customization for high current or low impedance loads.
Describes stereo operation or mixed mono selection for pure stereo or simultaneous stereo/mono.
Uses multiple small input capacitors for lower ESR, enabling faster power transfer.
Gradually reduces power when hot, with a secondary circuit shutting off if overheating persists.
Amplifiers designed to drive virtually any load, including 1/2 ohm stereo or 1 ohm mono.
Provides six times the drive current of most amps for performance into low impedance loads.
Adjustable subwoofer equalization circuit for frequency and Q adjustment, plus subsonic filter.
Explains how to select between High Power and High Current modes for different impedance applications.
Details the amplifier's operating modes: Coherent Stereo, Mixed-Mono, and Bridged Mono.
Specifies cable gauge, fuses, and circuit breakers for amplifier power and ground connections.
Illustrates connections for speakers, head unit, power, and remote turn-on.
Provides guidance on amplifier location, mounting procedures, and ventilation requirements.
Details the procedure for setting input levels to maximize undistorted output and optimize SNR.
To Next Page
