To Next PageTo Next Page
Need help?Do you have a question about the Soundstream USA-204 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 50W x 2 |
| RMS Power at 2 Ohms | 100W x 2 |
| Bridged RMS Power at 4 Ohms | 200W x 1 |
| THD at Rated RMS Power | <0.05% |
| Signal to Noise Ratio | >95dB |
| Frequency Response | 20Hz - 20kHz |
| Bass Boost | 0-12dB |
| Peak Power Output | 400W |
Welcome message, recording serial number, and warranty details.
Details power output, crossover frequencies, and physical dimensions of USA amplifiers.
Explains internal circuits for amplifier safety against heat and shorts.
Lists common amplifier problems and their potential causes and solutions.
Explains how to set and adjust the amplifier's electronic crossover frequencies.
Describes Stereo, Mixed-Mono, and Bridged Mono input configurations.
Guidelines for using appropriate gauge power and ground cables.
Specifies fuse values and placement requirements for amplifier protection.
Details internal fuses, remote turn-on, signal, and speaker cable connections.
Instructions on choosing a location and securely mounting the amplifier.
Procedure for setting amplifier input levels for optimal performance.
