Need help?Do you have a question about the Soundstream MC-140X and is the answer not in the manual?
General| Brand | Soundstream |
|---|---|
| Model | MC-140X |
| Category | Car Amplifier |
| Language | English |
Covers power ratings and configurations for both models, including multi-channel options.
Discusses Darlington outputs, advanced cooling, Smart Power Supply, and internal fuses.
Details premium parts, adjustable input sensitivity, and the electronic crossover.
Describes using an insulated flat blade screwdriver for secure wire connections.
Advises on choosing a suitable location, ensuring ventilation, and proper mounting.
Guidelines for routing, securing, and protecting audio and power wires.
Refers to diagrams for various system setup configurations.
How to set internal switches for stereo/mono configurations (2, 3, or 4 channels).
Details crossover points (180Hz HP, 90Hz LP) and speaker connections for MC140X.
How to set internal switches for stereo/mono configurations (3, 4, or 5 channels).
Describes crossover points and connections for the MC245's internal crossover.
How to use RCA inputs in stereo (left/right) and bridged (right only) modes.
Utilizes switch for single source input or full bi-amp systems.
Connecting for stereo, bridged, and optional separate subwoofer inputs.
Controls activation of external subwoofer inputs.
Recommends premium cables and addresses preamp output variations.
How to connect using speaker outputs if preamp outputs are unavailable.
Recommends Soundstream High Definition speaker cable and its proper use.
Explains the importance of correct speaker polarity and impedance matching.
Specifies the requirement for a 12-volt negative ground electrical system.
Discusses current draw and ensuring adequate car charging system capacity.
Details in-line fuse installation and connecting the remote turn-on wire.
Discusses using power antenna or ignition-switched sources for remote turn-on.
Emphasizes verifying all connections and settings before powering on the system.
Steps for initial system power-on, volume control, and basic troubleshooting.
Guide to adjusting input levels for optimal balance and listening experience.
Advice on managing different head unit output levels for proper gain matching.
Explains protection against overheating and short circuits via Smart Power Supply.
Points to enclosed warranty details for product coverage.
Lists various power output options for the MC140X (e.g., 4x35W, 2x90W).
Includes THD, S/N, Damping, Impedance, Sensitivity, Current Draw, Dimensions.
Lists various power output options for the MC245 (e.g., 5x35W, 3x90W).
Includes THD, S/N, Damping, Impedance, Sensitivity, Current Draw, Dimensions.
To Next Page
