Do you have a question about the Soundstream XTA180.2 and is the answer not in the manual?
Channels | 2 |
---|---|
RMS Power @ 4 Ohms | 90W x 2 |
RMS Power @ 2 Ohms | 180W x 2 |
Bridged RMS Power @ 4 Ohms | 360W x 1 |
Minimum Impedance Unbridged | 2 Ohms |
Minimum Impedance Bridged | 4 Ohms |
Bass Boost | 0-12 dB |
Bass Boost Frequency | 45 Hz |
Frequency Response | 10 Hz - 30 kHz |
Crossover Frequency | 50 Hz - 500 Hz |
Input Voltage | 0.2V - 6V |
Crossover Type | LP/HP |
Fuse Rating | 30A |
Signal to Noise Ratio | >95dB |
Diagnosing no sound issues based on LED status and voltage checks.
Troubleshooting sound only in one channel by checking RCA and speaker connections.
Understanding amplifier behavior during Short Circuit and Thermal Protection.